DIY Touch-Up Tips for LP® SmartSide® ExpertFinish® Chips & Scratches
Your homes exterior is constantly exposed to the elements – from shifting ladders during installation to tree branches brushing against the siding. Even your durable LP® SmartSide® ExpertFinish® Trim & Siding can show small chips or scratches over time.
That’s why the LP® SmartSide® ExpertFinish® Trim & Siding products come with a matching Touch-Up Kit, available for purchase, designed specifically to handle these minor imperfections. It’s a simple way to restore your siding’s curb appeal – without needing to repaint the entire wall.
What is the LP® SmartSide® ExpertFinish® Touch-Up Kit?
The LP® SmartSide® ExpertFinish® Touch-Up Kit is a color matched paint and concealer system created to help you maintain your siding’s factory-finished look.
Each kit includes:
1 quart of touch-up paint:
Pre-matched to your specific LP® ExpertFinish® color.
Cut end applicator:
A larger applicator for quickly and efficiently sealing cut ends.
Nail head concealer applicator:
A smaller applicator for precisely covering nail heads.
Nail head concealer:
A 2-ounce empty container, that you can pour paint into from the quart jug, for easy management.
Applicator tips:
Multiple tips for both the cut end and nail concealer applicators.
Instructions:
Guidance on how to properly apply the touch-up paint.
It’s available in all 16 ExpertFinish® colors, as well, as the LP® SmartSide® ExpertFinish® Naturals Collection™ colors.
When to Use LP® SmartSide® ExpertFinish® Touch-Up Kit
The touch-up kit will be useful when you need a quick fix to keep your siding looking its best.
Use the kit when you see:
Damages to the siding finish during application/install.
Exposed nail heads or cut ends after installation
Scuffs or marks around windows, doors or trim
Areas where siding is adjusted or recently repaired
Tip: the sooner you touch up small damages that you find, the better your siding will resist moisture and stay color consistent.
Step-by-Step on How to Use the LP® SmartSide® ExpertFinish® Touch-Up Kit
Clean the Area: Wipe away dirt or debris. Ensure that the surface is dry and the temperatures of the air, siding, and paint are above 50°F.
Shake well: shake the paint for at least 90 seconds before each use.
Apply Sparingly: Touch-up paint air dries, unlike factory coatings which are oven-cured. This can cause slight differences over time, so it's best to limit touch-up use to keep them less noticeable.
Seal Exposed Edges: Use the Cut End and Nail Head concealer for nail heads and small nicks.
Let it Dry: Allow to dry and cure before evaluating the color match.
LP® SmartSide® ExpertFinish® Trim and Siding is built to last – but every exterior benefits from maintenance. With the LP® SmartSide® ExpertFinish® Touch-Up Kits, you can easily fix small chips, scratches, or nail holes and preserve your home’s curb appeal for years to come!
Contact your contractor today to purchase the LP® SmartSide® ExpertFinish® Touch-Up Kits!
For more information on LP® SmartSide® ExpertFinish® Trim and Siding visit https://lpcorp.com/products/siding-trim
